EN
41
• Disconnect the power supply by removing
the fuse from the fuse box in the vehicle,
before starting the electrical connection.
• Connect the power supply wire to one of
the auxiliary terminals in the fuse box.
• Connect the black earth wire to a metal
part on the vehicle body or chassis. Make
sure that the earth wire is in good contact
with the body/chassis.
• Connect the other wires as shown in the
diagram
NOTE:
The warranty will be invalidated if the
product is connected or used incorrectly.
1. DAB antenna
2. FM/AM antenna
3. Back left output
4. Back right output
5. Fuse (15 A)
FIG. 8
A. Reversing camera (+) [yellow]
B. Automatic antenna (+) [blue]
C. Earth [black]
D. B+ [red]
E. Back speaker, right side
1. violet 2. violet/black
F. Back speaker, right side
3. violet 4. violet/black
G. Front speaker, left side
5. white 6. white/black
H. Back speaker, left side
7. green 8. green/black
FIG. 9
USE
FUNCTIONS
The following descriptions refer to diagram 1.
3. Remove the front panel.
FIG. 5
Attaching front panel
1. Fit the right end of the panel in the main
unit.
2. Press the left end of the panel until it
clicks in place in the main unit.
FIG. 6
IMPORTANT:
• Do NOT attempt to fit the left end of the
panel first – this can damage the panel.
• The front panel is sensitive to knocks
and blows. After taking off the panel put
it safely away in a bag and avoid
dropping or knocking it.
• When pressing in the lock button the
panel can easily come loose and drop
down as a result of the movement or
vibration of the vehicle.
• On the back of the front panel there is a
plug for all the electrical connections
between the panel and main unit. The
plug is sensitive and very important. Do
not touch it with your nails, or any other
objects like pens or screwdrivers.
NOTE:
The plug on the front panel (A) should when
necessary be cleaned with a cotton cloth
moistened with isopropanol. Wipe the rest of
the panel with a dry, soft cloth.
FIG. 7
ELECTRICAL CONNECTION
• The product must only be connected to a
12 V electrical system (the vehicle battery
has 6 cells) with a negative terminal
connected to the chassis. A polarity
converter is needed if the vehicle has a
positive terminal connected to the chassis.
Содержание 007859
