EN
38
• Install the product in such a way that
traffic safety and the safe use of the
product is not put at risk.
• Do not expose the product or any part of
it to moisture or water – risk of electric
spark and fire.
• Do not change the fuse holder in the power
cord to a fuse with a different size to the
original one – the wrong size of fuse can
damage the product and is a fire risk.
• Contact the retailer if:
– Water or any other substance has got
into the product.
– The product is emitting smoke.
– The product is emitting an abnormal
smell.
– Adjust the volume to a safe and
comfortable level.
Remote control and batteries
Failure to follow these instructions can cause
the remote control to be damaged and stop
working.
• Do not expose the remote control or its
batteries to direct sunlight or other
sources, of heat, such as radiators, ovens
or other equipment that emits heat. Do
not use or keep the remote control near
naked flames.
• Do not expose the remote control or its
batteries to rain, snow, or moisture, or put
the remote control where it can be exposed
to dripping water or any other liquid, for
example under a vase of flowers or other
vessel containing water.
• Do not use the remote control outdoors or
near water.
• Recycle used batteries in accordance with
local regulations.
• The incorrect use of batteries can cause
leakage and corrosion. Follow the
instructions below to ensure that the
SAFETY INSTRUCTIONS
• The product must only be connected to a
12 V electrical system with a negative
terminal connected to the chassis.
• To reduce the risk of damaging the
product as a result of a short circuit during
the installation, the negative cable must
be disconnected from the battery in the
vehicle before connecting the product.
• Check that the product is correctly
connected as per the wiring diagram
(colour coded wires). Incorrect connection
can cause the product to malfunction and
damage the electrical system in the
vehicle.
• Check that the speakers are correctly
connected:
– the wire marked (–) must be connected
to the terminal marked (–).
– Never connect the right and left
speaker wires to each other or to the
vehicle body or chassis.
• Do not cover or block the ventilation
openings on the product in any way.
Blocked ventilation openings will result in
overheating, damage to the product and
a fire risk.
• Do not dismantle the product or attempt
to modify, or repair it – risk of malfunction
or damage to the product.
• No functions of the product that can have
an adverse effect on traffic safety must be
used or adjusted when driving – stop the
vehicle first.
• Do not use product if the ambient
temperature is less than –10 or higher
than +50°C.
• Carefully check that all the connections
are correct, especially the power supply
(high current) and memory (low current).
Correct connections minimise the power
consumption when switched off
(closed-circuit current consumption) and
safeguard the settings in the memory.
Содержание 007859
