KAYO MOTOR T2, Руководство по обслуживанию

Страница: 20 / 61

ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.us - 19 -
10.Inspection of the remaining components
Visually inspect the entire motorcycle for loose parts. Tighten any loose
bolt or parts
. Check the battery charge.
check the lights.
Note: these pre ride checks won't take much time, but it can help you
develop good riding habits and make your daily riding easier and safer.
chain adjuster
Starting steps
The steps to kick start as follows (if with kickstart lever )
1. Switch the fuel tank to the "ON" position;
2, the left hand pull in clutch handlebar;
3, the right hand pull in the brake handle;
4. kick the kickstart lever down in a smooth rapid motion
5.once the engine starts up, release the kickstart lever and fold back to
its regular position. Clutch handlebar
Start lever ignition switch
The electric starting steps are as follows:
1. Switch the fuel tank to the "ON" position;
2. turn the key switch on;
3, the left hand pull in clutch lever;
4, the right hand pull in front brake lever;
5. push the start switch with the right thumb;
6. once then engine starts make sure you are in neutral and release
clutch and brake levers
Note: when the vehicle starts, the brake should be applied to prevent the
vehicle from starting in gear.