10.Use tool
⑫
to tighten E for the rear rack
cover.
11.Install the rear central reflector(O) on the rear
rack, use tool
③
to tighten the nut, then install the
rear left/right reflector(N) on the rear rack.
12.Use tool
④⑤
to remove the bolts that fix the
rear wheel axle and the packing frame.
13.Put the vehicle on the stand for easy
installation of other accessories.
14.Use tools
①⑤⑥⑨
to tighten the bolts and
nuts(B) (torque requirement 49-59N.m)
15.Please refer to user’s manual (A) for air
pressure requirements. Use compressed air to
inflate the tires and use the air pressure gauge (J)
to inflate to the standard value of 5psi.