Kaye LTR-150, Руководство по эксплуатации

Страница: 10 / 44

10
| Kaye LTR-150 - Dry Block & Liquid Bath All-in-One Temperature Calibrator
Chapter 2. Safety Information
WARNING! A Warning identifies conditions and procedures that are dangerous to the user.
CAUTION! A Caution identifies conditions and procedures that can cause damage to the product or
equipment under test.
See Table 1 below for list of symbols used in this manual and on the LTR-150.
Table 1: Hazard Signs and Symbols
Before you install the LTR-150, read through this operating manual carefully. If the instructions
contained within it are not followed, the safety guidelines, this could result in danger for people,
the environment, and the device and the system it is connected to.
To guarantee that the device operates safely, the operator must act competently and be conscious of safety
issues.
General safety instructions:
In all work, the existing national regulations for accident prevention and safety in the workplace must be complied
with. Any internal regulations of the operator must also be complied with, even if these are not mentioned in this
manual.
Ensure that the complete operating instructions are always available in excellent condition at the calibrator installation
site.
Degree of protection per EN 60529: Ensure that the ambient conditions at the site of use does not exceed the
requirements for the stated protection rating.
Structural safety in accordance with EN 61010-1: The calibrator must be installed in such a way that the
requirements for structural safety are met.
Only use the LTR-150 if it is in perfect condition. Damaged or faulty devices must be checked without delay and, if
necessary, replaced. If problems cannot be cleared, immediately shut down the calibrator and ensure that it
cannot be started up accidentally.
Chapter 2. Safety Information