High Speed Camera User Guide
15
6.1
Essentials to get started
To begin using your JetCam system, you must have the following:
A computer with the following:
Processor with an Intel 64-bit architecture, or equivalent.
An availably x4 (or x8 or x16) PCIe slot. Gen 3 support is recommended for faster
data transfer.
Vision Point Application installation
JetCam camera
Komodo Fiber board
Fiber QSFP+ Modules
Fiber optic cable
NOTE: KAYA Instruments doesn’t guarantee compatibility with all computers that have the above
specifications. Please, consult KAYA representative for any specific issue
.
6.2
Installation instructions
The typical
JetCam
system is connected as described in Figure 2:
Komodo Fiber
Frame Grabber
JetCam Camera
Fiber cable
(up to 10 km)
Power
supply
Figure 2 : JetCam Camera system connection diagram
6
Installation and Configurations