![background image](http://html1.mh-extra.com/html/kawai/mp7se/mp7se_owners-manual_3984448026.webp)
26
M
ain
O
pe
ra
ti
on
In regular Play Mode the LCD display provides a visual indication of the selected zone and sound, and the values of
the four real-time control knobs (A, B, C, and D).
The function of each knob can be assigned to control any parameter in the EDIT menu, allowing frequently used
functions to be accessed from a single screen. Furthermore, two groups of knob parameters (2 x 4) can be defined
for each of the MAIN, SUB1, SUB2, and SUB3 zones, providing extensive real-time control.
Control knobs:
Adjust value of assigned
parameters or settings.
Function buttons:
Select zone and various
other operations.
Selected sound
Selected zone/knob group
INT/MIDI button:
Toggle between zone
modes (INT/EXT/BOTH).
Please refer to page 23.
Selecting zones, primary/secondary knob groups
Press the F1~F4 function buttons located below the LCD display
to select the desired zone.
The bottom tab representing the zone will become highlighted,
and the name of the selected sound and primary group of knob
parameters will be shown in the LCD display.
Press the same function button to cycle between the zones’
primary and secondary knob parameters in the LCD display.
* While in the EDIT menu, pressing the same F1~F4 FUNCTION button will
scroll through the different parameter pages.
Changing zones modes (INT/MIDI button)
For information about changing zone modes, please refer to page 23
.
Adjusting parameters
Turn the four control knobs (A, B, C, D) located on either side of
the LCD display to adjust the displayed knob group parameters.
* EDIT menu parameters can be freely assigned to each of the four knobs in
the Knob Assign page of the EDIT menu (page 51).
Parameters can also be adjusted by using the CURSOR buttons
to move the selection cursor, and +/YES or –/NO buttons to
increase or decrease the value of the selected parameter.
Primary
Secondary
LCD Display & Control Knobs