manualshive.com logo in svg

Kawai MP11SE, Руководство пользователя

Поделиться
Скачать
Kawai MP11SE Скачать руководство пользователя страница 112

112

SY

ST

EM

 M

enu

Panel Lock ( )

The Lock ( ) function allows the state of the MP11SE’s various controls to be temporarily locked, preventing 
accidental button pushes, pedal presses, or wheel movements.

 Activating and deactivating the Lock function

Press the LOCK ( ) button.

The LED indicator for the LOCK ( ) button will turn on, and the 
lock pop-up will be briefly shown in the LCD display.

By default (Panel Lock mode), the Lock function will lock all of 
the MP11SE’s panel buttons, knobs, and section VOLUME faders, 
preventing any accidental adjustments during performances etc.

*  The VOLUME and LINE IN faders will not be locked.  The keyboard will also 

remain active.

Press the LOCK ( ) button again to deactivate the lock.

 Changing the Lock mode

Press and hold the LOCK ( ) button, then press the +/YES or 
–/NO buttons to cycle through the different Lock modes.

 

Lock modes

Lock mode

Description

Panel Lock

The main control panel buttons, knobs and section VOLUME faders will be locked.

Bend Lock

The pitch bend wheel will be locked.

Mod. Lock

The modulation wheel will be locked.

Center Lock

The centre pedal will be locked.

Left Lock

The left pedal will be locked.

EXP Lock

The expression pedal (EXP) will be locked.

LED indicator ON:

Lock function is activated

LED indicator OFF:

Lock function is deactivated

hol

d

* The Lock mode can also be changed in the SYSTEM menu.  For more 

information, please refer to page 101.

Содержание MP11SE





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды