Page
25
5
FUNCTION MODE
5. FUNCTION MODE
The Function Mode settings allow various advanced parameters of the KDP80 digital piano to be adjusted.
1) BASIC OPERATION
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press one of the 10
keys assigned to the desired function.
The LED indicators for the METRONOME and SOUND SELECT buttons will start to flash while the settings are being
adjusted.
¢
If the LED indicators for either the CONCERT MAGIC or LESSON buttons are turned on, the Function Mode cannot be
used.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the ‘- (off)’ or ‘+ (on)’ keys
to change the value for the selected function.
¢
While holding down the METRONOME
and SOUND SELECT buttons, it is
possible to select other functions,
changing each value successively.
Step
Release both the METRONOME and SOUND SELECT buttons to exit Function Mode.
¢
When the power is turned off, Function Mode settings will be reset to the factory default
values, shown below.
Function
Default
TOUCH
Normal
TRANSPOSE
0
TUNING
A4=440.0Hz
REVERB
On
DAMPER EFFECT
2 (Normal)
CONCERT MAGIC MODE
Mode 1
MIDI CHANNEL SELECT
1ch
MIDI LOCAL CONTROL ON/OFF
On
MULTI TIMBRAL MODE ON/OFF
Off
TRANSMIT MIDI PROGRAM CHANGE
On
Use the enclosed ‘function label’
(page 8) for your convenience.
Hold down the both buttons
number keys
10
TRANSMIT MIDI PR
OGRAM CHANGE
9
MUL
TI
TIMBRAL MODE ON/OFF
8
MIDI LOCAL CONTR
OL
7
MIDI CHANNEL SELECT
6
CONCER
T MA
GIC MODE
5
D
AMPER EFFECT
4
REVERB
3
TUNING
2
TRANSPOSE
1
T
OUCH
MIDI settings
1 2 3 4 5 6 7 8 9 0
- +
off on
