33
A
dj
ust
m
en
ts
&
Se
tt
ings
Keyboard and Sound Settings
The KDP120/KDP75’s keyboard and sound settings allow various aspects of the instrument to be adjusted.
Keyboard and Sound Settings
Setting name
Explanation
Default setting
Damper Resonance
Adjust the resonance that is heard when depressing the damper pedal.
Medium
Reverb
Change the type of reverberation added to the sound.
On
Touch
Change the touch sensitivity of the keyboard.
Normal
Low Volume Balance
Change the difference in volume between pianissimo and fortissimo playing. Type3
Tuning
Increase or decrease the pitch of the keyboard in 0.5 Hz steps.
440.0Hz
Transpose
Increase or decrease the pitch of the keyboard in semi-tone steps.
0
Brilliance
Adjust the brightness of the sound.
0
Virtual Technician
Select the tuning from 10 preset styles.
Off
Spatial Headphone Sound
Select the desired Spatial Headphone Sound mode.
Normal
Phones Type
Select the type of headphones to be used with the instrument.
Normal
1
Damper Resonance
Depressing the sustain pedal of an acoustic piano raises all dampers, allowing the strings to vibrate freely.
When a note or chord is played on the piano with the sustain pedal depressed, not only will the strings of the
notes played vibrate, but also the strings of other notes, vibrating in sympathetic resonance.
The KDP120/KDP75 digital piano recreates this phenomenon, with the Damper Resonance setting allowing
the volume of this resonance to be changed.
Damper Resonance
Sounds affected by Damper Resonance
Concert Grand
Studio Grand
Mellow Grand
Modern Piano
Damper Resonance type
Damper Resonance type
Description
Key
Off
Disables the damper resonance effect.
C#2
On
(Re)Enables the damper resonance effect.
D#2
Small
Piano sounds produce a small amount of damper resonance.
F#2
Medium
(default)
Piano sounds produce a medium amount of damper resonance.
G#2
Large
Piano sounds produce a large amount of damper resonance.
A#2
Changing the Damper Resonance type
Operation Guide: SOUND (page 12~13)
Press and hold the SOUND SELECT button, then press the key assigned to the desired Damper Resonance type.
* To disable/enable the damper resonance effect, press the key assigned to the off/on function.
* If the damper resonance effect is disabled, it will be turned on automatically upon selecting a damper resonance type.