Page
10
2
PLA
YING THE
PIANO
2. PLAYING THE PIANO
1) BASIC OPERATIONS
This section provides the basic procedures for turning the power on and playing the CN42 piano.
SETTING UP THE PIANO
The CN42 piano is equipped with stereo speakers and an amplifi er—no additional equipment is required to begin
playing the instrument, provided AC power is available.
Step 1
Connect one end of the AC power cable to the piano’s power jack and
the other end of the cable to a wall AC outlet.
Step 2
Press the POWER SWITCH to turn on the power.
The POWER SWITCH is located at the right end of
the front panel.
Press the POWER SWITCH again to turn off the power.
When the POWER button is pressed, the LED
indicator for the PIANO1 button will turn on and
the Concert Grand sound will automatically be
selected.
‘Concert Grand’ will also be shown in the LCD display.
Step 3
Adjust the volume level using the MASTER VOLUME slider.
The MASTER VOLUME slider controls the volume level of the speakers and connected headphones.
Move this slider to the right to increase the volume and move it to the left to decrease the volume.
Use this slider to set the volume to a comfortable listening level—the middle is often a good starting point.
ON
Concert
Grand
Power
cable entry
point
Speaker
Side panel
CN42̲EN.indd 10
2008/12/11 13:28:50