Kawai CN301, Руководство пользователя

Страница: 87 / 96

87
Appendix
A
ssembly I
nstruc
tions
1. Attaching B and C to E
①
Unfasten the pedal cable attached to E (one location only)
and extend the cable.
②
Take the screws temporary mounted in E and set each one to
the metal groove of B and C, respectively.
③
Make sure that B and C are pressed against E without a gap.
Then, fasten the temporary mounting screws.
④
Insert the four silver tapping screws
d
into the rest of the
holes. Tighten the screws to secure the panels in place.
B
E
③
②
d
B B
B B
E E
E E
B
C
E
③
①
④
Pedal cable
Gaps
Temporary mounting screw
2. Attaching D
①
Allow the E assembled with B and C to stand upright as
shown in the figure below.
Ensure that the adjustor is attached and the floor is
clear from parts or musical scores etc..
②
Align the screw hole position of D to that of B and C. Use four
pieces of the long black tapping screws
b
to set them in
place temporarily.
③
Align the screw hole position of D and E. Use four pieces of
the short black tapping screws
c
to secure them in place.
④
Ensure that B and C are aligned with D without a gap, and
then fasten the temporarily mounted
b
long black tapping
screws* to keep them in contact.
* For some of the body colours, silver screws are provid-
ed instead of black screws.
BB
DD
CC
b
b
b
b
c
c
c
c
③
④
②
①
Not aligned
Adjustor