background image

–  4  –

Failure to do so may cause breakdown of this 
product and other devices.

Doing so may cause the product to generate 
noise.

If  the  product  generates  noise,  move  the 
product  sufficiently away from the electrical 
appliance or connect it to another AC outlet.

Failure to do so may damage  them, resulting in 
fire, electric shock or short-circuit.

Entry of water, needles or hair pins may result 
in breakdown or short-circuit.
The product shall not be exposed to dripping or 
splashing.  No objects filled with liquids, such as 
vases, shall be placed on the product.

When  connecting the AC  power  cord 
and other cords, take care 
not to get them tangled.

Do not place the product near electrical
appliances such as TVs and 
radios.

Take care  not to allow any foreign 
matter to enter the product.

Before  connecting  cords,  make sure 
that the power to this product 
and other devices is turned 
OFF.

CAUTION

OFF

Using the product in such areas may result in 
product breakdown.

Closing it roughly may trap your fingers, resulting 
in injury.

Do not use the product in the following areas.

● 

Areas, such as those near windows, where the product is 
exposed to direct sunlight

● 

Extremely hot areas, such as near a heater

● 

Extremely cold areas, such as outside

● 

Extremely humid areas

● 

Areas where a large amount of sand or dust is present

● 

Areas where the product is exposed to excessive 
vibrations

When you close the keyboard cover, 
close it gently.

Indicates a potential hazard that could result in injury 
or damage to the product or other

The product is not completely disconnected from the 
power supply even when the power switch is turned 
off.  If the product will not be used for a long time, 
unplug the AC power cord from the AC outlet.

Failure  to  do  so  may  cause  fire  in  case  of
lightning.

Failure  to do so  may  over-heat  the  product,
resulting in fire.

When disconnecting the AC power cord's 
plug, always hold the plug 
and pull it to remove it.

Pulling  the AC power cord itself may damage 
the cord, causing a fire, electric shock or 
short-circuit.

Do  not  disassemble,  repair or modify 
the product.

Doing so may result in product breakdown, electric 
shock or short-circuit.

Please lift up the product when moving it.
Please  note that the product is heavy and must 
be carried by more than two persons.
Dropping the product may result in breakdown.

Do not drag the product on the floor.
Take care not to drop the product.

This product may be equipped with a polarized line plug (one blade 
wider than the other).  This is a safety feature. 
If you are unable to insert the plug into the outlet, contact an 
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.

Doing so may cause the product to fall over, 
resulting in injury.

Do not lean against the keyboard.

Содержание CN290

























Отзывы: