Kawai CN27, Руководство пользователя

Страница: 48 / 56

48
A
pp
en
di
x
Assembly Instructions
2. Attaching the back board
Allow the assembled pedal board and side panels to stand
upright (vertically) on the floor .
* Ensure that the adjustor bolt is attached to the pedal board .
Loosely attach the back board (D) to the left and right side
panels using the four long black tapping screws * .
Loosly attach the bottom of the back board to the pedal
board using the four mid-length black or silver tapping
screws * .
Adjust the positioning of the pedal board, side panels, and
backboard to ensure that all parts are in alignment, then
tighten the screws in steps and .
* For Satin White finished instruments, black screws will be replaced
with silver screws .
B
C
D
adjustor bolt
not aligned
1. Attaching the side panels to the pedal board
Unfasten and extend the pedal connection cable attached
to the bottom of the pedal board (E) .
Attach the pedal board (E) to the left (B) and right (C) side
panels using the temporary mounting screws located on
either end of the pedal board .
Ensure that the pedal board and side panels make close
contact, and that there are no large gaps between the
assembled parts .
Insert the four short silver tapping screws into the holes
as shown, and securely fasten the pedal board to the left
and right side panels .
B
B
E E
E E
B
B B
B
E
E
C
Pedal cable
temporary
mounting
screw
gap