Kawai CN27, Руководство пользователя

Страница: 11 / 56

11
Pre
pa
ra
ti
on
B
efore
U
se
Setting Up the Piano
1. Connecting the power adaptor
Connect the AC power adaptor to the DC IN terminal located
on the underside of the instrument, as indicated below .
2. Connecting the power adaptor to an outlet
Connect the AC power adaptor to an AC outlet .
3. Turning on the power
Press the POWER switch, located on the right hand side of the
instrument’s front panel .
The LED indicator for the SOUND SELECT button will turn on
and the SK Concert Grand sound will be selected automatically .
To prevent data loss when turning off the instrument, do
not disconnect the power cable until
is shown in
the LCD display .
4. Adjusting the volume
Move the MASTER VOLUME slider up and down to increase
and decrease the volume level of the instrument’s speakers, or
headphones if connected .
Adjust the volume to a
comfortable listening level
– the middle is often a good
starting point .
Increase
volume
Decrease
volume

Using headphones
Use the jacks located beneath the keyboard on the left hand
side, to connect stereo headphones to the CN27 digital piano .
Up to two pairs of headphones can be connected and used
simultaneously . When a pair of headphones is connected,
sound will not be produced by the speakers .

Adjusting the pedal support bolt
A pedal support bolt is attached at the base of the pedal board
to aid stability when the pedals are pushed . Turn the bolt anti-
clockwise until it makes contact with the floor and supports
the pedals firmly .
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.