KaVo SMARTair Evo FLEXspace, Инструкция по эксплуатации

Страница: 34 / 46

Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace
6 Operation | 6.3 Operation via foot switch
34 / 46
Display Suction power Malfunction Action
The "Suction level
display" LEDs
① to
④ shine.
The maximum ex-
traction level has
been reached. No malfunction Reduce the extrac-
tion level by press-
ing the "Minus"
key
⑥ .
The LED "Filter
full"
⑤ flashes.
The suction
threshold is almost
reached. The filter bag or ul-
tra-fine filter is al-
most full. Replace filter bag
and/or ultra-fine
filter.
The suction hose
or suction site is
dirty. Clean the suction
hose or suction
site.
The LED "Filter
full"
⑤ shines.
The suction
threshold has been
reached. The filter bag or ul-
tra-fine filter is al-
most full. Replace filter bag
and/or ultra-fine
filter.
The suction hose
or suction site is
dirty. Clean the suction
hose or suction
site.
6.3 Operation via foot switch
▶
Insert the cable of the foot switch
③
into the socket for the control line
②
.
▶
Press the "Automatic" button
④
until the "Automatic" LED
①
is on.
▶ Switch the suction device on and off using the foot switch ③ .
6.4 Adjust the suction levels
3
2 1 4
5 6
▶ Press the buttons ⑤ and ⑥ to set suction levels ① to ④ .
Activate the suction level default
Note
The suction level thus set can be saved and stays saved after the device is
switched off.
▶
Press and hold the "Plus"
⑥
button and switch the power switch on.