KaVo ProXam 3DQ, Инструкция по эксплуатации

Страница: 76 / 88

12 Cleaning and disinfection
For cleaning agents and disinfectants approved by the manufacturer, see
document
KaVo approved disinfectants. The document can be found on the
KaVo website.
NOTE
Switch the X-ray unit off before cleaning and disinfection.
NOTE
Use a cleaning agent and surface disinfectant approved by the
manufacturer. The products are categorised here as cleaning agents and /
or disinfectants according to the information provided by the manufacturers.
NOTE
Follow the instructions provided by the manufacturer of the cleaning agent,
disinfectant and autoclave.
NOTE
FOR SPRAYS, LIQUIDS AND FOAMS:
Do not apply sprays, liquids or foams directly on the surfaces. Apply
sparingly to a clean soft cloth and wipe the surface with the cloth.
Contact your service technician for help if sprays, liquids or foams enter the
system.
12.1 Patient supports, patient handles and touch screen
Wipe these parts after each patient using a surface disinfectant.
Use a agent approved by the manufacturer for cleaning stains and dirt if
needed.
3D patient supports
12 Cleaning and disinfection
72 KaVo ProXam Instructions for use