KaVo MASTERsurg LUX Wireless, Инструкция по эксплуатации

Страница: 23 / 76

Instructions for use MASTERsurg LUX Wireless REF 1.009.1200
4 Commissioning | 4.3 Getting the wireless foot control ready for operation
▶ Plug the button bar ① onto the wireless foot control ② and press it on lightly until
the button bar ① snaps into place ③.
1
2
3 3 3
3 3 3
4
▶ Plug the speed button ① onto the wireless foot control and press it on lightly until
the snap-in lug ② snaps in. Make sure that the foot pedal springs are situated in
the recesses of the housing ③.
▶ Slide the bracket into the designated recesses.
The wireless foot control is now ready for operation and can be used. The initial con-
nection is done at the factory.
Note
Stand-by mode
The wireless foot control does not need to be switched on and off. It switches into
stand-by mode automatically after a certain period of rest or once the MASTERsurg
LUX Wireless is switched off. To start the wireless foot control, briefly press the
pedal once.
Note
If the wireless foot control is not connected or if it is in stand-by mode, a yellow
warning symbol of the wireless foot control is shown on the display of the MASTER-
surg LUX Wireless.
▶ To solve the problem:
See also:
2
5.2.7 Connect the wireless foot control, Page 34
23 / 76