Instructions for use MASTERmatic LUX M25 L - 1.009.3630, MASTERmatic LUX M05 L - 1.009.3640
2 Safety | 2.1 Infection hazard
7 / 28
2 Safety
NOTE
All serious events occurring in relation to the product must be reported to the
manufacturer and the competent authority of the member state, in which the
user and/or patient resides.
The instructions for use are an integral part of the product and must be read
carefully prior to use and must be accessible at all times.
The device may only be used in accordance with the intended use, any other
type of use is not permitted.
2.1 Infection hazard
Patients, users or third parties could be infected by contaminated medical
devices.
4
Take suitable personal protective measures.
4
Follow the instructions for use of the components.
4
Before initial startup and after each use, reprocess the product and ac-
cessories appropriately.
4
Carry out the reprocessing as described in the instructions for use. The pro-
cedure has been validated by the manufacturer.
4
If you deviate from this validated procedure, make sure that the repro-
cessing procedure is effective.
4
Reprocess the product and accessories appropriately before disposal.
4
In the case of injury to soft tissue, do not continue treatment in the oral
cavity with instruments driven by compressed air.
4
Use gloves or a finger guard when you test, insert and remove the dental
bur.
2.2 Improper use
Because the operation with an electric motor involves a higher torque, patients,
users and other people can suffer injuries and serious burns if an instrument is
damaged or used improperly.
4
Check the technical condition before each use.
Also refer to:
2.3 Technical condition, Page 7
4
Never press the push-button during operation of the device.
4
Never use the instrument to keep the cheek, tongue or lip at a distance.
4
Never touch soft tissue with the handpiece head or instrument cover.
4
Do not use the medical device as a light probe.
4
Use an appropriate light probe for illumination of the oral cavity or site of
preparation.
4
After treatment, place the medical device properly in the cradle without the
tool.
4
Do not allow the medical device to rotate at eye level.
During the preparation of abutments, heat transmission can cause thermal
damage to the jawbone.
4
During the preparation of abutments, make sure that the preparation times
are short and that there is sufficient cooling.
2.3 Technical condition
If damaged, the device or components could injure patients, users and third
parties.
