KaVo MASTERmatic LUX M10 L, Инструкция по эксплуатации, Страница: 11 / 26

Instructions for use MASTERmatic LUX M10 L - 1.009.3570
5 Operation | 5.1 Attach the medical device
5 Operation
5.1 Attach the medical device
WARNING
Release of the medical device during treatment.
A medical device that is not properly locked in place can release from the motor cou‐
pling and fall off.
▶ Carefully pull on it before each treatment to ensure that the medical device is se‐
curely locked on the motor coupling.
CAUTION
Connect to the drive motor.
Handpiece blocked.
▶ Only start the handpiece when the chuck is closed.
CAUTION
Removing and attaching the handpiece while the drive motor is rotating.
Damage to the catch.
▶ Never attach or remove the handpiece while the device is rotating!
▶ Lightly spray O-rings on motor coupling with KaVo Spray.
▶ Attach medical device to the motor coupling and turn it until you hear the latch
snap into place.
▶ Pull on the medical device to make sure that it is securely affixed to the coupling.
5.2 Remove the medical device
▶ Unlock the medical device from the motor coupling by twisting it slightly and then
pulling it along its axis.
5.3 Insert the handpiece or contra-angle handpiece drill bit.
Note
Only use handpiece or contra-angle handpiece drills that correspond to ISO 1797-1
type 1 and type 2, are made of steel or hard metal and meet the following criteria:
Shaft diameter: 2.334 to 2.350 mm
with a drill bit stop:
- Shaft clamping length: at least 12 mm
- Overall length: max. 22 mm
without a drill bit stop:
- Shaft clamping length: at least 30 mm
- Overall length: max. 44.5 mm
11 / 26