Installing the Saphir-Tip handpiece
Installing the BareFiber Tip handpiece
Connecting the transmitting optical fibre
Registering the wireless foot switch
Touch the lower status bar.
Confirm the registration by touching
OK.
Follow the instructions on the screen.
The unit switches to therapy mode.
The wireless foot switch symbol is displayed.
The wireless foot switch must be registered with the unit at each start-up!
(this function can be changed by the service staff)
The part of the transmitting optical fibre that is not needed for the treatment should be
kept below the fibre reel!
Switching the device on
Touch the On button
.
Each laser unit that is not being used
must be protected from unauthorised
use.
Change the factory-set PIN!
Enter the PIN using the numbers bar
(the factory-set PIN is 1234).
