KaVo 1.004.7783, Инструкция по эксплуатации, Страница: 9 / 17

▶ Insert the tool into the segment of the head drive by twisting the tool
slightly, and push to the stop.
▶ Check that the tool is seated securely by pulling on it.
55.4 R Removing the milling tool or diamond grinder
CAUTION
Hazard from rotating tools.
Laceration.
▶ Do not carelessly contact rotating tools.
Operation 31
CAUTION
Actuation of the pushbutton chuck while the tool is rotating.
Injury.
Damage to the chucking system.
▶ Do not press the pushbutton while the tool is rotating!
▶ After the tool has stopped rotating, forcefully press the pushbutton with
your thumb and simultaneously remove the tool.
Operation 32
DANGER
Hazard from defective checking system.
The tool can fall out and cause injury.
▶ Pull on the tool to check if the chucking system is functioning properly
and that the tool is firmly clamped. Wear gloves or a thimble to check,
insert, or remove the bits to prevent injury and infection.
Operation 33
66 TTroubleshooting
6.1 C Check for malfunctions
CAUTION
Missing or damaged O-rings.
Malfunctions and premature failure.
▶ Make sure that all O-rings are on the coupling and undamaged.
CAUTION
Heating of the product.
Burns or product damage from overheating.
▶ Do not use the product if it is irregularly heated.
Troubleshooting 34