Kauo Heng KH-300, Руководство по эксплуатации

Страница: 53 / 70

KAUO HENG COMPUTERIZED FLAT KNITTING MACHINE
▼
Key board operation and function as below.
F1 Jump
：
Input the required wale and course to jump.
F2 CHG
：
Change color, after present area (Start
:
X, Y; End: X, Y)
Press F2 key to select the code for change. For example:
Input 4 in 1 of area, then all the 1 in area will be changes to 4.
F3 Start
：
In the required X, Y in preset area, pressF3 key for start point
and press F3 key for end point the finish set area.
F4 Set
：
Set the required area to change all of them to the same code.
F5 Copy
：
Copy the required area, the cursor position in the start point,
input the time to copy.
F6 Move
：
Move the required area, the cursor position in the start point,
press Enter key.
F7 InsW
：
Insert wale, increase one wale in X direction.
F8 DelW
：
Delete wale, delete one wale in X direction.
F9 InsC
：
Insert course, increase one course in Y direction.
F10 DelC
：
Delete course, delete one course in Y direction.
Fn
＋
←
：
Jump to the first wale.
Fn
＋
→
：
Jump to the Last wale.
Ctrl
＋
↑
：
Jump to up page.
Ctrl
＋
↓
：
Jump to down page.
1 page
：
40 x 9 points.
Finish edit, then press ESC key to exit and return.
KH-300
OPERATION MANUAL
51