Kauo Heng KH-300, Руководство по эксплуатации

Страница: 38 / 70

KAUO HENG COMPUTERIZED FLAT KNITTING MACHINE
KH-300
OPERATION MANUAL
36
█
Explanation for edit main control
When edit new Main-program it must be in the step No.1 of main program
and preset Racking and sub-program then can do exit.
P.set–R, P.set–F, Yarn Stop, Turn ADJ, Stitch, Speed, T.down / Sub.T.down
and Piece etc. Total 8 sub-program
Attention: Piece preset 0, Racking preset R0, ADRS and others preset 1, after
then edit by required data.
In main program has available 1 to 4096 steps for edit.
1. System - 1 and system - 2
:
Shown in screen when run combinative carriage for double system
2. System - L and System - R
:
Shown in screen when run separate carriage for single system
3. ADRS
:
Select the course in the file in Edit Pattern
4. Knit
:
Select the code in the file in Edit Pattern
5. Tuck
:
Select the code in the file in Edit Pattern
6. Tran : Select the code in the file in Edit Pattern
7. Yarn
:
Set feeder No.1 to 6
8. P. set – R
:
In the Rear pattern setting data , range from 1 to 16
9. P.set – F
:
In the Front pattern setting data, range from 1 to 16
10. Yarn Stop
:
Set Yarn stop, range from 1 to 8
11. Turn ADJ
:
Set carriage return distance, range from 1 to 4
12. Racking
:
R is racked to the right side, L is racked to the left side