Kattsafe RL30 Series, Руководство по установке, Страница: 9 / 81

Maximum safety. Minimum Fuss. 9 Kattsafe / RL30 Series Installation Manual
1
2
When joining (2) ladder bodies, it will require (2) splice joins. Prepare the splice joins by
making a mark at 12in (halfway). Insert the splice joins into the ladder body stiles up to the
halfway mark.
Fasten with (2) #12 x 3/4 inch S/S Tek Screw on the inside of the ladder body. Locate
approximately 2in above the first rung closest to the splice join.
IMPORTANT NOTE:
We suggest installing (1) Tek Screw per side initially to make it easier to slide the ladder body
modules together.
SPLICE JOINT INSTALLATION: STEP 1
Prepare splices - Mark center line of each splice by measuring approximately 11-3/4in
from the end of the splice join. Insert into stile, using center mark as a stopping guide.
SPLICE JOINT INSTALLATION: STEP 2
Fix the splice joint in place with QTY(2) #12 x 3/4in S/S Tek Screws [SD907.20] on the inside
of the ladder body above the first rung, QTY(1) Tek Screw per side.
Installing (1) Tek Screw per side initially makes it easier to slide the ladder sections together.
IMPORTANT NOTE: Ensure Tek Screws are flush, but DO NOT OVERTIGHTEN as
aluminum can deform and threads can strip out if too much pressure is applied.
!
CLIMBING
DIRECTION