Kattsafe RL30 Series, Руководство по установке, Страница: 13 / 81

Maximum safety. Minimum Fuss. 13 Kattsafe / RL30 Series Installation Manual
5
Once cutting is complete, stand the ladder in place. If the ladder is of increased length, a
crane or lift may be needed to lift the ladder safely.
Fasten the ladder body to each wall bracket with (2) Kattsafe S/S T-bolts. See graphic (A)
for proper T-bolt locking method.
Repeat this step for all wall brackets.
BRACKET TO LADDER BODY INSTALLATION
Brackets fasten with T-Bolt, Lock Nut & Cap Combination. Place the fixing brackets so that the slots
line up with the channels on the ladder body.
Fasten fixing bracket to ladder with QTY(2) KATTSAFE S/S T-Bolts.
IMPORTANT NOTE: Ensure indicator notch marking at the end of the T-Bolt is at a right angle to the
channel on the ladder body, see diagram below for correct installation.
!
T-BOLT CORRECTLY FASTENED
INCORRECT
BRACKET TO LADDER BODY INSTALLATION
Brackets fasten with T-Bolt, Lock Nut & Cap Combination. Place the fixing brackets so that the slots
line up with the channels on the ladder body.
Fasten fixing bracket to ladder with QTY(2) KATTSAFE S/S T-Bolts.
IMPORTANT NOTE: Ensure indicator notch marking at the end of the T-Bolt is at a right angle to the
channel on the ladder body, see diagram below for correct installation.
!
T-BOLT CORRECTLY FASTENED
INCORRECT
Graphic A
 