16
How to care for the KB Glow®
Whilst the KB Glow® is fairly shatter resistant, it must be treated with care and recommendations
should be followed at all times.
In the event that
you break a panel(s) then you will have the opportunity to order a replacement
panel(s) by emailing [email protected]
Easy to assemble and disassemble in minutes for portability and easy storage.
Keep in the box when not in use to keep all components safe.
Take care when assembling, dissembling and use and be mindful of any sharp edges.
Do not force panels together or apart as this can damage components.
Make sure the panels are
securely
‘clicked’ into place following the assembly instructions
correctly – otherwise the unit will not be secure.
If, when using the unit, you find the back panel a little loose, use the white rubber bands
enclosed with the KB Glow® to secure them into place a little more. Simply slide them over
the two hooks once the back panel has been fitted.
Be mindful of the surface that the KB Glow® is stored on, if this knocked off it may result in
the panels becoming lose and unsecure. Check the unit over if knocked. If this is knocked
off the surface, it may result in breakage.
Keep the KB Glow® out of the way of potential falling objects. If any object falls on the unit,
it may result in breakage.
Do not bend the panels.
If the panel appears to be too stiff to slot in easily, try the opposing matching panel.
Due to the tolerances of new plastic, this can sometimes appear a little stiff. This will
loosen over time. Use a little lubricant such as Vaseline to ease to panels together. Never
force panels together or apart as this will result in breakage.
Do not store heavy items on top of KB Glow® as this may damage the structure.
Solvent resistant. Has been tested with acetone, monomer and such like nail products with
brief exposure. Please follow COOSH guidelines for safe cleaning and disposal of these
nail products.
Do not leave solvents of spilt nail products on the panels for extended periods as this will
damage the panels.
Wipe clean using baby wipes, disinfectant wipes, water, or other such cleaning products.
Keep liquids away from any power sources and lights. Follow HSE guidelines on safe use
of electrical items in the workplace. Lights are splashproof but not waterproof so care must
always be taken.
If using the film guide markers, use the original backing paper to store these in-between
use to allow for reuse. Take care when removing and replacing these guides to not damage
the guide markers.
If the LED light strip loosens in any way, these can be easily re-adhered using double sided
adhesive. Make sure that the area is free from dust before adhering.
Dimensions
Width:
66cm
Height:
29cm
Depth
(with base): 37cm
Depth
(without base): 28cm
