On screen displays
On screen displays
Important screen displays
The receiver functions are controlled by a microprocessor and extensive software.
The following explanations are intended to improve understanding of all proce-
dures and to minimise the risk of mistakes.
TV channel identifier
The channel identifier is displayed for
several seconds every time the channel is
changed or by pressing the
O
button.
The
I
indicates that a channel is received
even if no picture can be seen (e.g.
radio). The film symbol indicates a TV channel with the selected programme shown
next to it and whether teletext is received. The current time, start time and end time
of the current programme are shown on the next line provided these data are
transmitted. The
+
in the third line stands for the programme selection from the
main programme list. If the favourite list is selected, you will see the "apple" symbol
at this point. This is followed by the set sound reproduction mode (depending on
the direction of the symbolised sound waves, mono left, mono right or stereo can
be set, the digit indicates the number of sound channels). The programme title is
shown in the box on the right.
Radio channel indicator
The identifier for the set radio channel has
the same configuration. A music note
appears in the upper right-hand corner
indicating a radio channel. Programme
times and text are displayed only if the
corresponding data are transmitted with
the signal.
Error message
"Bad or no signal" indicates that there is a
fault in the reception system or in the re-
ceiver settings or the transponder is not
transmitting. Instead of the
I
the channel
identifier shows a satellite antenna together
with the message "bad or no signal". Check
the SAT-IF connection and the LNB
configuration. As an aid, refer to the list of
service settings provided at the end of this User's Guide.
TV programme list
Press the
i
button to show the
programme list. A
+
for the main
programme list or the "apple" symbol is
indicated at the top left. The list can be
changed by pressing the button again.
Information relating to the received
satellites, transponder and its frequency,
the polarisation, the symbol rate,
scrambling, favourite or standard
programme and the parental control is
17
Содержание UFD 520
Страница 1: ...Operating Manual Order no 260 498 ...
Страница 2: ......
