Kathrein SAT IP 414/E, Руководство пользователя

Страница: 11 / 20

2 / 9
• The equipment described is designed solely for the installation of satellite
receiver systems. Any other use, or failure to comply with these instructions,
will result in voiding of warranty cover.
• The equipment may only be installed in dry areas indoors. Do not install on
or against highly combustible materials.
• The power supply unit is only authorised for on-wall
mounting!
• The equipment must be provided with an earthing wire
(Cu, at least 4 mm
2
).
• Unused F-type connectors must be terminated with an EMK 05 (voltage-
separated).
• The safety regulations set out in the current EN 60728-11 and EN 60065
standards must be complied with.
• Connectors for coaxial cable: RF plugs 75Ω (series F) to
EN 61169-24.
Electrically live unit
• Do not open the unit or tamper with it!
• When working on the system always unplug the mains plug from the wall
socket!
• There must be free circulation of air to dissipate the heat from the unit. Risk
of overheating! Clearance all round must be at least 5 cm!
• Ambient temperature range: 0 to +40°C
Important:
• Do not place liquid-filled items on top of the device or power supply unit.
• The device or power supply unit must not be exposed to dripping or splash -
ing water.
• The mains plug must be easily accessible and operable.
• The only reliable method of disconnecting the unit from the mains is to un -
plug it.
Installation and safety instructions
• An inner cable conduc- An inner cable conduc-
tor diameter greater than
1.2 mm, or the presence
of burrs may damage the
product inputs/outputs be-
yond repair
Max. 2 mm
excess
length
Clamping torque
max. 3.4 Nm (danger
of overwinding)
Diameter
0.6-1.2 mm
free of burrs