Kathrein MVG 10, Руководство оператора

Страница: 22 / 28

Channel sweep generator
22
Channel sweep generator
The channel sweep generator is used to sweep in 10 preset ranges.
The channels can be programmed to free ranges depending on the
channel allocation in the cable network, so that measurement is
possible without interrupting or interfering with programmes. The
channels and signal levels can be selected freely.
Only use the channel sweep generator on free channels so that
programmes and services in the cable network are not
interrupted.
Please use the operating concept on page 2 for help with
understanding the operating sequence.
Function Button actuation Display
Switch on unit when depressed
briefly
The upper display appears first,
then the lower display shortly
afterwards with the last function
that was set
On
Off
Select "Channel sweep
generator" main function and
show battery charge state
▼
▲
Confirm selected
main function
Show last level set Menu
Select
Set signal level
W X
- +
Enter signal level directly
followed by "Enter"
or
0 9
see above
Enter pre-programmed
channel sequence (0…9)
Incorrect entries are
not accepted!
▼
W X
+
- +
Enter pre-programmed
channel sequence
di "Enter"
Incorrect entries are
not accepted!
or
0 9
see above
ChannelSweep...
Accu 100 %
CSw Level
XX.X dBµV
CSw ChanRange
Nr: X
KATHREIN MVG10
NG Store
nr: 0
CSw Level
60.0 dBµV