6
Water Sensor FWM 100
Product description:
The water sensor alerts you of water leaks and floods so that countermeasures can
be taken as soon as possible. If the probe detects water for more than ten seconds,
the water sensor sends an alarm signal to the alarm panel and both emit acoustic
alarms.
Sensor data:
Dimensions (without mount):
9.5 x 3 x 8.3 cm
(3.74 x 1.18 x 3.26 in)
Cable length:
29.5 cm (11.61 in)
Weight:
113 g (0.24 lbs)
Operating temperatures:
-10 °C to +45 °C
(14 °F to 113 °F)
Humidity:
Maximum 95%
Detection method:
Wheatstone bridge
1.
Red LED (internal – shines through the housing)
•
Flashes twice: water detector was successfully
added
•
Flashes every twenty minutes: water detector
has lost the connection
•
Flashes permanently: water detector is in
standby mode
2.
Learn/Test button
•
Pressing the test button once sends a
supervisor signal to the alarm panel.
•
Pressing the test button for more than ten
seconds resets the water detector and deletes it
from the sensor list.
•
Pressing the test button while the water detector emits an alarm sets the
water detector to standby mode.
3.
External water probe
4.
External water probe port
5.
Battery compartment
•
The water sensor requires a CR123A 3 V lithium battery. The average battery
life is 2.6 years, if one alarm per month is triggered.
•
The water detector sends a status regularly to the alarm panel. The alarm
panel is informed immediately when the battery runs low.
6.
Attachment notches for wall mounting
7.
Water sensor on housing bottom
