Kathrein Euroline UFE 341S, Руководство по эксплуатации

Страница: 28 / 36

Installations-Menu
28
Note: It may be that some channels do not transmit the correct GMT time. In
this case the receiver will display an incorrect time. To display the
previous time, tune in to a different European channel and wait a few
minutes for the receiver to display the correct time again.
System Information
Display of the receiver's hardware and software versions.
Factory Reset
This menu is protected by the default password "0000". If you have
changed the receiver's programming and want to reset it to its original
setup when shipped, select this line. Press the
OK button and key in
the password. After about a minute the memory will be updated. Turn
the receiver off and back on again at its power switch. Select the menu
language you want to use and press
OK to confirm.
Important: The receiver is reset to its factory configuration. Any changes you may
have made are lost. The channel list, too, is reset to its ex factory
status.