1 / 2
Feed system without LNB fitted; allows use of a special LNB
Modular offset housing
With R120 waveguide transition
One polarisation
Suitable for CAS 80/90/120/124 and 180 offset parabolic
antennas
Power supply via drop cable
Complete protection of LNB and cable connections in a
ventilated housing, protection: IP 54
EAS
124
227243
Feed system
without LNB, polarisation horizontal or vertical
Features
The EAS 124 feed system may be mounted only on the Kathrein parabolic antennas listed
above. The feed system is subject to the same safety and danger warnings as listed in the user
instructions for offset parabolic antennas. Please follow these instructions at all times, as otherwise
you or your colleagues may be exposed to danger (electric shock through overhead lines,
risk of falling down, falling parts, thunderstorm etc.).
Installation and safety instructions
LNC installation (Fig. 1)
1. Remove the cover
2. Undo the screws
S
and remove the waveguide flange
3. Fit the LNB to the flange, using the screws supplied
4. Place the LNB with the flange flat on the exciter, and pre-
assemble using the screws
S
Feed system installation (Fig. 2)
S
Distance between
screws 65 mm
Inside diameter of the hood 90 mm
Waveguide flange
insert here
M
A
= 6.5 + 1 Nm
Fig. 1
Fig. 2
