KATEK TeleAlarm LE80, Руководство пользователя, Страница: 19 / 32

LE80 Radio Receiver Programming | en 19
TeleAlarm User Manual LE80_UM_EN_V1.1_2021.12
5.7 Manual programming a door address in
modes 3, 4 or 7
You can program a door address stored in a transmitter
with Locating function, in modes 3, 4 or 7.
To start programming
–
Press button T1 min. 1 second and max. 3 seconds.
Device behavior
–
LED 1 stays permanently green.
– LED 2 blinks red slow for max. 30 seconds.
– Activate the transmitter with Locating function, which
you desire to match, before the end of the 30 seconds.
– Upon activating the transmitter, LED 1 and LED 2 blink
alternating green-red quick for 6 seconds.
This indication confirms that the door address of the
transmitter with Location function is matched in the LE80
Radio Receiver.
5.7.1 Programming in modes 6
It is neither possible nor necessary to program a transmitter
in mode 6 (open Receiver).
NOTICE!
A door address must be stored beforehand in a transmitter
with Locating function. That could also be done using the
PR80 and NCCM software.
NOTICE!
Only one door address can be matched in the LE80 Radio
Receiver.
CAUTION!
When a new door address stored in a transmitter is
programmed, it overwrites the current door address.