KATEK TeleAlarm LE80, Руководство пользователя, Страница: 18 / 32

18 en | Programming LE80 Radio Receiver
LE80_UM_EN_V1.1_2021.12 User Manual TeleAlarm
Device behavior
–
LED 1 stays permanently green, then after 5 seconds it
will blinks fast 5 times. After releasing T1 LED 2 will start
to blink red for 30 seconds. To delete the transmitter,
activate its button during this period.
– At that moment, LED 2 lights up permanently red for 5
seconds and then turns off.
This indication confirms that the transmitter is deleted.
When no transmitter remains programmed, LED 2 blinks
every 10 seconds three times in a row blue, till at least one
transmitter will be
programmed again.
5.6 Manual deleting all transmitters
To start deleting
–
Press button T1 for minimum 20 seconds and maximum
40 seconds.
Device behavior
–
LED 1 stays permanently green, then after 5 seconds, it
will blinks fast 5 times. After 20 seconds, LED 1 will start
to blink green for 20 seconds. The T1 button must be
released during this period.
– At that moment, LED 2 lights up permanently red for 5
seconds then turns off.
This indication confirms that all transmitters are then
deleted. As a second confirmation LED 2 blinks every 10
seconds three times in a row blue, till at least one
transmitter will be programmed again.
NOTICE!
If button T1 is pressed longer than 40 seconds, then the LE80
Radio Receiver will leave the programming mode.