22.
Withdraw the
rudder pin on the
starboard rudder.
Align the rudder
assembly on the
rudder stock on the
starboard hull and
re-insert the rudder
pin. Move the
rudder from side to
side to ensure that
it is operating
freely. Connect the
steering quick
release ball joint at
the end of the
steering cable to
the steering crank
on the starboard
gudgeon.
Take care when the rudder blade is connected to the hull and
on the ground. Avoid any movement of the hulls or if you do
need to move them then lift the Katalyst and rudder clear off
the ground.
23.
Now centre the
rudder so that it is
pointing straight
aft. Go to the fore
spar and check that
the steering
handlebar is in the
straight forward
position.
© Katalyst Marine Ltd.
17
