9.
Move to the front
of the hull. Lay the
fore spar into the
mounting slots with
the sliding block
and two small star-
knobs closest to
the starboard hull.
Secure the fore
spar firmly with the
outer tri-knob. Do
not yet tighten the
inner tri-knob that
holds the eye tang
in place.
10.
Move to the left-hand end of the aft spar. Pick it up and move
the port (or left) hull into position so that the end of the spars
slot into the mounting slots of the hull. Register the tri-knobs
and fasten them firmly. Move to the fore spar and secure it
firmly with the outer tri-knob. Do not yet tighten the inner tri-
knob.
11.
Place your blokart
on top of the spars
and align the axle
tube with the axle
brackets on the aft
spar.
© Katalyst Marine Ltd.
12
