Katadyn Spectra Watermakers Catalina 340R Скачать руководство пользователя страница 67

Страница: 67 / 73

Spectra Product Registration Form

Registration (To be completed by owner)

Boat model or type (i.e. Leopard 44, Beneteau 55' powerboat, catamaran, powercat,

42’

sailboat

…)

______________________________________________________________________________

What type of boating will you be doing and what will the watermaker primarily be used for:

______________________________________________________________________________

Submission for Approval:

Please submit this document along with the Installation and Commissioning Reports to Spectra

Watermakers for approval. Submissions can be

submitted online

, scanned and emailed, or mailed directly

to the factory. Spectra Watermakers Technical Support will email the original owner and the authorized
distributor with the status of submission.

Web

Based Format (Preferred option):

spectrawarranty.formstack.com/forms/product_registration

spectrawarranty.formstack.com/forms/spectra_install_commissioning_report

Email:

[email protected]

Phone: +1(415) 526

2780

Address: Katadyn Desalination

Technical Department

2220 S. McDowell Blvd Ext

Petaluma, CA 94954

USA

Please keep a copy of these reports for your records.

Any commissioning/install report (and additional 12 month warranty) may be rejected at the

sole discretion of Spectra Watermakers if the system is not installed correctly.

System Details:

Model ________________________ Date of install: ______________________________

digit S/N___________ Clark Pump S/N: _____________ Voltage_______

Dealer/distributor:____________________ Boat Location:___________ max speed:______

Original Owner Details:

Name:_________________________________ Phone Number:________________________

Email Address:________________________________________________________________

Address (Optional):____________________________________________________________

____________________________________________________________________________

Содержание Spectra Watermakers Catalina 340R










































































Результаты поиска

Содержание Spectra Watermakers Catalina 340R

Отзывы:

Бренды по названию

Популярные бренды

Katadyn Spectra Watermakers Catalina 340R, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Spectra Watermakers Catalina 340R

Отзывы:

Бренды по названию

Популярные бренды