Kässbohrer SILO Series, Руководство пользователя

Страница: 84 / 89

83 / 88
8. INSPECTION AND
MAINTENANCE
8.1. Safety Instructions
There is a risk of accident that
may arise in terms of a vehicle that
is not built or built insufficiently.
Read the following safety instructions
carefully.
•
Obey all traffic laws, rules and regula-
tions.
•
Comply with all environmental regula-
tions. When removing operation, ma-
intenance and cleaning residues, act
according to these rules.
•
In addition, ensure that the equipment
used in the vehicle such as axles, lan-
ding gears, pump, counter, hose reel
are checked and serviced at the inter-
vals specified in the manufacturer's
user manual.
Please refer to the pump manufac-
turer's manual for pump usage and
warranty conditions.
Please refer to the compressor ma-
nufacturer's manual for compressor
usage and warranty conditions.
If the EBS warning lamp comes
on for any reason in the vehicle,
immediately park the vehicle in
the appropriate place and contact the near-
est authorized service.
8.2. Main Principles
The purpose of the maintenance operations
on the vehicle is to provide the following.
•
Always maintain the operating status
of the semi-trailer,
•
To prevent unexpected breakdowns
and to extend the life of the vehicle,
•
To prevent permanent damage to the
semi-trailer,
•
To ensure that the semi-trailer main-
tains its value,
•
Reducing repair time for unavoidable
repairs.
•
The vehicle should be regularly clea-
ned and kept clean.
8.3. Checks to Be Performed Of The
Time of the Delivery
•
Check that the electrical system and
connections and all lighting elements,
brake and signal lamps are working
properly.
•
Check that the documents of the ve-
hicle are in the vehicle.
•
Grease the wheel plate and king pin.
•
Check the tightness of the wheel nuts.
•
Check that the landing gear works in
both speed ranges.
8.4. Manhole Covers
If the thread of a hatch clamp (1) is
damaged, manlid can tear away
explosively from the silo tank and
injure you or others.
Hatch clamp
•
The silo vehicle should never be placed
under pressure even if only one thread is
damaged.
•
Always only hand tighten the hatch clamp
crosswise.
•
Replace damaged threads immediately.
Leak tightness