Kässbohrer Reefer 2023 Series, Руководство пользователя

Страница: 61 / 72

61 / 72
4 units of huckepack brackets, special
axles and air suspensions. Trailer is
lifted and loaded to train with a crane.
Train loading brackets
You can reach the information about
which wagon types of your vehicle can
be loaded on from the sticker located at
front of side panel.
Train loading sticker
•
(1) 5th wheel height that must be
used at the wagon which trailer
loaded.
•
(2) Height of lowest level of vehicle
when it connected suitable 5th
wheel.
•
(3) Suitable wagon types.
•
(4) Load safety certification that ve-
hicle has.
Be sure that the vehicle is loa-
ded to suitable wagon type
and height code.
Fold upwards the foldable
mudflaps before train loading.
Foldable bumper must be lif-
ted in order to load the vehicle
to some A1 type etc. wagons.
Be sure to check wagon requi-
rements before train loading.
Be sure that airbags are disc-
harged completely and the ve-
hicle is at the lowest level
while loading the vehicle to
train.
After the train loading opera-
tion, make sure that the air-
bags are properly seated, the
mudflap
and bumper are
brought to the driving posi-
tion, and the vehicle is taken
to the driving height.
6.4. Dangerous Goods Transportation
(ADR)
Vehicles carrying dangerous goods
should keep this plate in open position
while driving. This plate is usually lo-
cated at the rear of the vehicle, but its
exact location may vary depending on
the vehicle's construction. Approved ve-
hicles in accordance with ADR legisla-
tion must have an ADR identification
plate.
ADR plate opening