Kasei KZ-2700PP-PRO-2S, Руководство оператора

Страница: 23 / 45

PREPARING FOR OPERATIONS
Adjusting the Telescoping Shaft
Always shut off the engine and fit the chain guard.
●
Loosen the screw.
●
Adjust shaft to the required length.
●
Tighten down the screw firmly.
Fitting the Harness
The type and style of the harness depend on the market.
●
Put on
the shoulder strap (1).
●
Adjust the length of the strap.
●
With the
power tool attached, the carabiner (2) must be at about the same
height as your right hip.
Controls
1 Throttle trigger lockout;2 Throttle
trigger;3 Slide control
Starting
●
Press down the trigger lockout lever and squeeze the throttle trigger.
●
and
hold them in that position.
●
Move the slide control to START and hold it
there.
●
Now release the throttle trigger,slide control and trigger lockout in
that order. This is the starting throttle position.
●
Set the choke knob (4):
if the engine is cold for warm start – also use this position if the engine
has been running but is still cold.Press the fuel pump bulb (5) at least five
times – even if the bulb is already filled with fuel.
WARNING!To quickly detach the
pole saw from the shoulder strap ,pull
the quick-release latch tab upward.
-21-