Kasei KZ-2700PP-PRO-2S, Руководство оператора

Страница: 22 / 45

Opening the filler cap
The bayonet-type oil tank filler cap with hinged grip can be
opened and closed without tools.
To open the tank, swing the grip to the vertical position.
Turn the filler cap counterclockwise as far as stop and remove.
●
●
Filling up with chain oil
Filling up with chain oil
Take care not to spill chain oil while
refilling and do not overfill the tank.
●
Closing the filler cap
To close the oil tank, place the filler cap in position with the grip upright, making sure the recesses are in alignment.
●
Turn the filler cap clockwise as far as stop.
●
Fold the grip down so that it is flush with the top of the cap.
If the oil level in the tank does not go down, the reason may be a fault in the oil supply system: Check chain
lubrication, clean the oilways.
Checking Chain Lubrication
The saw chain must always throw off a small amount of oil.
Never operate your saw without chain lubrication. If the chain runs dry,
the whole cutting attachment will be irretrievably damaged within a very
short time. Always check chain lubrication and the oil level in the tank before
starting work.Every new chain has to be broken in for about 2 to 3 minutes.
After breaking in the chain, check chain tension and adjust if necessary – see
"Checking Chain Tension".
-20-