manualshive.com logo in svg
background image

ADSL ROUTER 

    

USER MANUAL 

 

4

1.3  

System 

Requirements 

Before using this ADSL router, verify that you meet the following requirements: 

 

Subscription for ADSL service. Your ADSL service provider should provide you 

with at least one valid IP address (static assignment or dynamic assignment via 

dial-up connection). 

 

One or more computers, each contains an Ethernet 10/100M Base-T network 

interface card (NIC). 

 

A hub or switch, if you are connecting the device to more than four computers.

 

 

For system configuration using the supplied web-based program: A web browser 

such as Internet Explorer v5.0 or later, or Netscape v4.7 or later. 

 

1.4  

Factory 

Defaults 

 

 

The device is configured with the following factory defaults: 

 

IP Address: 192.168.1.1 

 

Subnet Mask: 255.255.255.0 

 

Encapsulation: RFC 2516 LLC 

 

VPI/VCI: According to local information 

 

1.5   

Warnings and Cautions

 

 

Never install telephone wiring during storm. Avoid using a telephone during an 

electrical storm. There might be a risk of electric shock from lightening. 

 

Do not install telephone jacks in wet locations and never use the product near 

water. 

 

To prevent dangerous overloading of the power circuit, be careful about the 

designed maximum power load ratings. Not to follow the rating guideline could 

result in a dangerous situation. 

 

Please note that telephone line on ADSL router must adopt the primary line that 

directly outputs from junction box. Do not connect ADSL router to extension 

phone. In addition, if your house developer divides a telephone line to multi 

sockets inside the wall of house, please only use the telephone that has 

connected with the splitter of ADSL router when you access the Internet. Under 

the above condition, if you also install telephone with anti-cheat-dial device, 

Содержание KD318RI


















Отзывы: