KA1750 Wireless Router
User Manual
27
7.2 Wireless Setup
7.2.1 Wireless Basic Settings
•
Network Mode
– If you have Wireless-G and 802.11b devices in your
network, then keep the default setting, Mixed. If you have only Wireless-G devices,
select G-Only. If you would like to limit your network to only 802.11b devices, then
select B-Only. If you want to disable wireless networking, select Disable. Note that
B-Only mode is not supported under WDS.
•
Network Name(SSID)
– Enter the name of your wireless network.
•
Country
– Select your Country from the pull-down list. This field specifies
the Country where the wireless function of the Router can be used. It may be illegal to
use the wireless function of the Router in a region other than one of those specified in
this filed. If your country or region is not listed, please contact your local government
agency for assistance.
•
Channel
– This field determines which operating frequency will be used.
It is not necessary to change the wireless channel unless you notice interference
problems with another nearby access point. If you select auto, then AP will choose the
best channel automatically.
•
Bandwidth
– The bandwidth of the wireless channel.
•
SSID Broadcast
– When wireless clients survey the local area for
wireless networks to associate with, they will detect the SSID broadcast by the router.
To broadcast the router SSID, keep the default setting, Enable. If you do not want to
broadcast the router SSID, then select Disable
