KA1750 Wireless Router
User Manual
26
7.1.4 Advanced Routing Setup
Static Routing
A static route is a pre-determined pathway that network information must travel
to reach a specific host or network.
To set up a static route between the router and another network:
1.Select a number from the Static Routing drop-down list.
2.Enter the following data:
• Destination IP Address – The Destination IP Address is the address of the
network or host to which you want to assign a static route.
• Subnet Mask– The Subnet Mask determines which portion of an IP address is
the network portion, and which portion is the host portion.
• Gateway – This is the IP address of the gateway device that allows for
contact between the router and the network or host.
3.Depending on where the Destination IP Address is located, select LAN &
WLAN or WAN from the Interface drop-down menu.
4.Click the Apply button to save your changes. To cancel your unsaved changes,
click the Cancel button. For additional static routes, repeat steps 1-4.
To delete a static route entry:
1.From the Static Routing drop-down list, select the entry number of the static
route.
2.Click the Delete This Entry button.
3.To save a deletion, click the Apply button. To cancel a deletion, click the
Cancel button.
