RGBC5 WATERGLOW LIGHTING MANUAL
6
ALTERNATE MOUNTING INSTRUCTIONS
For J/VFX units:
Included with the light kit is optional hardware for use instead of the snap-on light clip. Assemble parts I, J, K,
and L as shown in the diagram below and tighten until secure. 7/16’’ socket and wrench required.
For 1/2, 3/4, & 1HP AF units:
Use alternate hardware instead of the snap-on light clip, following the directions above and continuing to
step 4 on page 5.
For Large Surface Aerator units:
Supplementary hardware is required in order to mount RGBC5 light fixtures to a large (2HP+) surface aera
-
tor. Use the additional hardware kit (P/N
840303
for 3 light fixtures or
840306
for 6 light fixtures).
These kits are sold separately. Contact Kasco Marine at [email protected] or your local distributor for
order information.
I
J
K
L
Back to Contents