manualshive.com logo in svg

Kasco Robust-Aire, Сборка и инструкция по установке

Поделиться
Скачать
Kasco Robust-Aire Скачать руководство пользователя страница 3

ROBUST-AIRE DIFFUSER ASSEMBLY MANUAL

2

IMPORTANT: PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE

•  Use caution when dealing with any electrical equipment.

•  Use caution around water.

•  Running the system in conditions below freezing may create open areas of water at the diffuser locations 

and thin ice in the surrounding area.

•  Some areas require warning signs to be posted. The system owner will assume all risks of operating the 

Robust-Aire™ system during winter months. Check your local laws and ordinances.

•  Do not use boats that tip easily, such as canoes, for installation. Follow all boating safety rules and 

regulations, including wearing a PFD (Personal Flotation Device).

•  Consult a qualified electrician for electrical installation.

SAFETY FIRST

Electrical Shock Hazard

Electrical Shock Hazard

SUGGESTED TOOLS & SUPPLIES

•  7/16” socket wrench with shaft extension or 7/16” nut driver

•  Adjustable wrench

•  Flathead screw driver or 1/4” nut driver

•  Retrieval ropes longer than the desired installation depth (optional)

•  Marker buoy (optional)

INSTALLATION SUGGESTIONS

Make sure to unroll any SureSink™ Tubing before installing the diffuser. Unrolling the tubing will make it 

less likely to kink during installation. Also make sure to unroll and connect any additional SureSink™ Tubing 

before going to the installation site.

Use a retrieval rope and marker buoy to allow for easy retrieval during maintenance or relocation of the 

Robust-Aire™ Diffuser.

WARNINGS:

Back to Contents

Содержание Robust-Aire















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды