manualshive.com logo in svg
background image

ROBUST-AIRE DIFFUSER ASSEMBLY MANUAL

11

Warranty Period: 5 years

Kasco® Marine, Inc. warrants this diffuser assembly to be free from defects in material or workmanship 

under normal use and service. The Kasco Marine, Inc. obligation under this warranty is limited to replacing 

or repairing free of charge any defective part within the warranty period. The customer shall pay shipping 

charges for returning the unit to Kasco or an Authorized Repair Center. 

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND ANY OTHER OBLI-

GATION OR LIABILITY WHATEVER ON THE PART OF KASCO MARINE, INC. AND IN NO EVENT SHALL KASCO 

MARINE, INC. BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES. 

Warranty is void if: 

• 

The assembly is not maintained properly according to the maintenance recommendations supplied in 

this manual. 

• 

The assembly is damaged by unauthorized tampering. 

Warranty Claim Procedure

The best method for establishing warranty period is via the original receipt. Also, register the unit online at: 

www.kascomarine.com

. Once the warranty coverage has been established, the unit may be sent to any Kas-

co Authorized Repair Center for evaluation and repair. Please call Kasco at 715-262-4488 prior to shipping 

to receive any updated information and/or Repair Form, or call to locate your nearest Authorized Repair 

Center. You can also email Kasco at [email protected]

Please include the repair form received from Kasco or your local distributor with the shipment. If no repair 

form is available, include your name and physical address for return delivery of the repaired unit and a day-

time phone number and/or email address for correspondence regarding the warranty claim. Any expedited 

shipping method for the return of the unit is at the customer’s expense. Kasco will return units repaired 

under warranty at our expense via ground freight within the continental United States.  

WARRANTY

Please attach a repair form with the shipment. The repair form must include a name, physical 
address (for return delivery of the repaired unit), daytime phone number, and an e-mail address 
for correspondence regarding the warranty claim.

Any expedited shipping method for the return of the unit is at the customer’s expense. Kasco will 
return units repaired under warranty at our expense via ground freight within the continental 
United States.

Back to Contents

Содержание Robust-Aire















Отзывы: