Kasco RGB4C5, Руководство по эксплуатации и техническому обслуживанию

Страница: 2 / 11

RGB4C5 UNIVERSAL LIGHTING MANUAL
884103 / 2021.1.1
2
Contents
Caution ���������������������������������������������������������������������������������������
2
Parts Included �����������������������������������������������������������������������������
3
Universal Mounting Instructions �������������������������������������������������
4
RGB Control Panel Installation & Operation �������������������������������
6
Control Input Features ����������������������������������������������������������������
7
Remote Control Features �����������������������������������������������������������
7
Maintenance Recommendations ������������������������������������������������
8
Warranty �������������������������������������������������������������������������������������
8
Repair �����������������������������������������������������������������������������������������
9
Non-Warranty Repairs ����������������������������������������������������������������
9
Repair Contact Form �����������������������������������������������������������������
11
CAUTION CAUTION
Please read and follow these important instructions to help ensure your safety and the quality performance of your Kasco equipment�
• RGBC5 kit is 120Vac and MUST be plugged into a GFCI protected receptacle or GFCI protected field terminal connections.
• RGBC5 fixtures MUST be properly submerged (approximately halfway) to avoid overheating; insufficient submersion or opera -
tion out of water will damage fixtures and void warranty.
• Use caution when dealing with any electrical and/or moving equipment�
• Under NO CIRCUMSTANCES should anyone enter the water with the electrical equipment plugged in and/or in operation.
• Kasco WaterGlow lighting kits are intended for use with a Listed control panel having a GFCI protected receptacle, or field wiring
terminals and disconnect switch, or a timer with a disconnect for use with a GFCI receptacle� They are intended to be mounted on
a floating fountain or aerator for use in a natural or man-made body of water to comply with NEC Article 682.
• Kasco WaterGlow lighting kits have not been evaluated for use in swimming pools, spas or stationary fountains�
• Use extreme caution around water, especially cold water, as in spring, fall, and winter, which poses a hazard in and of itself.
• NEVER lift or drag the equipment by the power cords. If you need to pull the unit to the side of the pond, use the anchoring ropes.
• Do not use boats that tip easily for lighting kit installation and follow all boating safety rules and regulations, including wearing a
PFD (Personal Flotation Device). Do not use waders in deep ponds/lakes or ponds/lakes with drop-offs, drastic slopes, or soft
bottom material�
• For more information regarding your control panel instructions, refer to your equipment owner’s manual. A control panel must be
installed a minimum of 5 feet (3m in Canada) from the body of water unless separated from the body of water by a fence, wall, or
other permanent barrier that will make the unit inaccessible to persons in the water. A complete list of control panels can be found
in the Accessories section of kascomarine�com �
• Warning : When using the universal mounting bracket assembly, ensure the WaterGlow fixtures are mounted properly to provide
cooling of the fixture. Typically, the bottom half of the fixture should be submerged. Recheck the fixture elevation with the fountain/
aerator in operation. Assembly to your fountain/aerator float will be as illustrated on the next page. Make adjustment to the fixture
elevation to ensure the fixture is properly submerged when the fountain/aerator is in operation.
• Many fountain/aerator floats will drop lower in the water when running.