background image

TEICH-AIRE MANUAL

5

WARNING

Install proper safety guards as needed.

Keep fingers and objects away from openings 

and rotating parts.

When provided, motor terminal covers must be 

in place for safe operation.

Allow product surfaces to cool before handling. 

Product surfaces become very hot during oper-

ation. 

Wear proper eye protection. Air stream from the 

product may contain solid or liquid material that 

can result in eye or skin damage. 

Wear hearing protection. Sound level from mo-

tor may exceed 70 dBA.

Failure to follow these instructions can result in 

burns, eye injury, or other serious injury.

Injury Hazard

OPERATION

It is your responsibility to operate this compressor at recommended pressures and permissible ambient 

temperatures. Do not start against a vacuum or pressure load.

If the motor fails to start or slows down significantly under load, shut off and disconnect from the power 

supply. Check that the supply voltage is correct and verify that the motor is turning in the proper direction. 

Check the plug, cord, and switch for damage. 

WARNING:

 Thermal protection switch may have tripped; the motor can restart automatically after cooling.

Back to Contents

Содержание KM-120












Отзывы: